EasyIO-30P-SF

Overview

The EasyIO-30P-SF Controllers are rugged, network centric, high performance multi-protocols Input/Output controllers to accommodate general and specific applications, featuring Bacnet IP, Bacnet Ethernet, Bacnet MSTP, Modbus Serial (RS485) and Modbus TCP/IP protocols plus a built-in Web server for easy configuration. Now, EasyIO-30P supports Sedona Framework™ which provides complete software platform for developing, deploying, integrating, and managing device applications at the lowest level.

Features:

 
 
  • Sedona Framework™
    Supports the newest, Sedona Framework™ which is the industry’s first, open source development framework that provides a complete software platform for developing, deploying, integrating, and managing pervasive device applications at the lowest level. The Sedona Framework™ distributes decision making control and manageability to any device and brings intelligence and connectivity to the network edge and back. Now, system integrator is able to develop theirs own application based on the Sedona Framework™.

  • Web Browser Configuration
    Built-in Web server enables configuration with popular web browser over an Ethernet connection. I/O status can be monitored over the Internet connection.

  • High-Speed Data Rates
    Multiple serial communication (RS485) speed selection from 9.6kbps to 115.2kbps. Supports Ethernet 10Base-T/ 100Base-T interface, half or full duplex.

  • As Bridge Controller
    The controller can be configured as Bridge Controller providing a network bridge for Ethernet and serial communication (RS485) via built-in protocol converter (for Modbus only). This will reduce wiring cost, simplify network mplementation and significant cost

  • Device ID
    Complementing existing standard protocols, EasyIO-30P can be uniquely identified over the network. This facilitating online network device search and simplify reconfiguration.

  • Network Security
    All configurations changes are protected via password setting, either through standard network protocol access (Modbus) or web
  • Multiple Input/Output Type
    The controller has eight Digital Inputs, eight Analogue Input for current, voltage, resistance and temperature sensor, eight Digital Outputs (relay), four Analogue Output (current and voltage), and
    two isolated Open Collector outputs (with PWM control) for high

  • High Accuracy Analogue Channels
    High speed 14-bits A/D converter with programmable gain amplifier yields a high resolution and accuracy reading on a12na-bliotgsuDe/iAnppruotvpiodienstsm.ore accurate analogue output control.

  • Online Help/Information
    All related information/helps are available through the controller web server. Information such as registers details, wiring diagram, device specification and etc are provided to assist the user.

  • Status Indicator
    Operational activity on each individual channel of DI, DO and Open Collector Outputs (PWM) are conveniently indicated by LED, so as the Power, Operation, Communication and Faults status.

  • Reset
    A Reset Switch has been provided for system reset without power removal (WarmStart operation).

  • Online Firmware Upgrade/Configuration
    The controller firmware can be upgraded either through RS485 or Ethernet connection. Network communication and operation parameters can be changed via RS485/Ethernet with the built-in boot-loader and terminal program.

 


 

Device Specifications

Built In Function Blocks

Electrical
Power Supply: 24VAC, 3.6VAmax, or 20 ~34VDC
Consumption: 150mAmax@24VDC
Operating Temperature: 32° to 150° F (0° to 65° C)
Storage Temperature: -4° to 150° F (-20° to 65° C)
Operating Humidity: 10% to 95% relative humidity non-condensing

Communication

Physical Interface 1 (Port 1):

  • EIA-485 (BUS A,B) Two-wire
  • HalfDuplex
  • Baud Rate Speed: (9.6K, 19.2k, 38.4K, 115.2K bit/s)
  • Data Bit: (8 bits)
  • Parity: (None, Even, Odd)
  • Application Protocol: BacnetMSTP,Modbus Serial
  • Multi-drop Capability: Yes, Slave (hardware ID setting)

Physical Interface 2 (Port 2):

  • Ethernet 10/100 Base-T
  • Ethernet Support: IP,TCP,UDP,ICMP,IGMP,FTP,HTTP
  • Application Support: Bacnet IP, Bacnet Ethernet,Modbus TCP and Sedona Sox.

Input/Output Configuration

Universal Input:

  • 8 Channels
  • Voltage: 0 - 10V (+/-0.005V) , 0 - 5V (+/- 0.003V)
  • Current: 4 - 20mA (+/-0.01mA) , 0 - 20mA (+/-0.01mA)
  • Resistance: 0 - 30K (+/-10 Ohm), 0 - 10K (+/-5 Ohm), 0 - 1.5K(+/-1 Ohm)
  • Thermistor: 10K, 10K Shunt, 1K Balco, 1K Platinum : All (+/-0.01°C)

Digital Input:

  • 8 Channels
  • Type: Voltage Free
  • Limit: +5V at 500Ohm Resistance maximum

Digital Output:

  • 8 Channels
  • Type: Relay Contacts, SPSTNO, 48VA at 24VAC, Pilot Duty

Transistor Output:

  • 2 Channels
  • Type: Open Collector Output, Isolation 3.75KV
  • MaxRating: 1A, 60V

Analogue Output:

  • 4 Channels (12 bits resolution)
  • Type: Current: 0 - 20mA, 4 - 20mA (up to 800 Ohm load), Voltage: 0 - 10V

Mechanical:

  • Dimens ion: 187mm x 110mm x 47mm
  • Material : UL94 ABS
  • Weight: 400g

Input/Output
1) Digital Input
2) Digital Output
3) PWMControl (Open Collector Output)
4) Analogue Input
5) Analogue Output
6) Totali ser
7) Pulse Accumulator

 

 

Sedona Native Functions


1) Time & Schedule Management
2) Timer Management
3) Special Functions like PID
4) Modbus
5) Bacnet
6) Digital Input
7) Digital Output
8) Analog Input
9) Analog Output
10) PWM
11) Pulse Accumulator
12) Totaliser

 


 

www.easyio.com Agency Listings :
Singapore
101 Cecil Street, #09-07
Tong Eng Building, Singapore 069533
+65.6.325.6083 Phone
+65.6.226.3040 Fax
Malaysia
32-3 Jalan Puteri 2/4, Bandar Puteri,
47100 Puchong, Selangor D.E, Malaysia
+60.3.8063.7571 Phone
+60.3.8063.7572 Fax
 
Copyright © 2014 EasyIO. All rights reserved. Powered by OrangeSoft Web Design